Divya-Sai Conchem | Home Page

Sr. No.	Product Name	Description	Specification	Features / Uses	Typical Application	Technical Information	Dosage / Coverage	Packing
1	DS-Chemiplast	Water reducing plasticiser for concrete	ASTM C 494 – Type AIS 9103: 1999	• To increase / extend workability • To reduce water content • To increase compressive strength • To effect cement economies • Improves the cohesiveness in concrete mix helping to reduce bleeding & segregation. • Allows water reduction till 10% whilst maintaining workability, thereby increasing strength, durability and impermeability. • Lower pumping pressure Read More	• Low grades concrete • Precast concrete • In concrete brick & block manufacture • In hot climates to extend workability • Wherever reduced water content would be of benefit to reduce permeability. Read More	Colour : Brown Liquid Specific Gravity @300C : 1. 170 +0.02 Chloride content : Nil pH : min. 6 Shelf life : 1 year	0.3 to 0.8 kg / 100 kg of cementitious binder (depending on site requirements)	250 kg drum / Bulk (9MT)
2	DS-Retainplast	Slump Retaining plasticiser for concrete	ASTM C 494 - Type B & DIS 9103: 1999	• Enables controlled extension of initial set. • Highly effective in high cement, low water content mixes where its use enables concrete to be more workable without loss in strength, density and durability. • To reduce water content • The retarding action allows continuous concrete pours to be made, thus reducing the number of construction joints needed. • The strength gain of concrete containing DS-Retainplast is enhanced. Read More	• Ready Mix Concrete • Precast concrete • In hot climates to extend workability & control setting time of concrete • White cement concrete Read More	Colour : Pale Straw Liquid Specific Gravity @300C : 1.160 +0.02 Chloride content : Nil pH : min. 6 Shelf life : 1 year	0.1 to 0.5 kg / 100 kg of cementitious binder (depending on site requirements)	235 kg drum
3	DS-Retainplast 10	Water reducing & retarding plasticiser for concrete	ASTM C 494 - Type B & DIS 9103: 1999	• Significantly increase or extend workability therefore easing placing. • To reduce water content and increase compressive strength. • To effect cement economies. • Improves the cohesive property of concrete helping to reduce segregation and bleeding. • Allows water reduction till 10% whilst maintaining workability, thereby increasing strength, durability and impermeability. Read More	• Ready Mix Concrete for lower grades • Precast concrete • In hot climates to extend workability. • Wherever reduced water content would be of benefit to reduce permeability. Read More	Colour : Brown Liquid Specific Gravity @300C : 1.180 +0.02 Chloride content : Nil pH : min. 6 Shelf life : 1 year	0.4 to 0.9 kg / 100 kg of cementitious binder (depending on site requirements)	245 kg drum / Bulk (9MT)
4	DS-Retainplast 30	Water reducing & retarding plasticiser for concrete	ASTM C 494 - Type B & DIS 9103: 1999	• Significantly increase or extend workability therefore easing placing. • To reduce water content and increase compressive strength. • To effect cement economies. • Improves the cohesive property of concrete helping to reduce segregation and bleeding. • Allows water reduction till 10% whilst maintaining workability, thereby increasing strength, durability and impermeability. • Lower pumping pressure • Moderate to extended retardation depends on the dosage. • Helps to eliminate cold joints. Read More	• Ready Mix Concrete for lower grades • Precast concrete • In hot climates to extend workability. • Wherever reduced water content would be of benefit to reduce permeability. Read More	Colour : Brown Liquid Specific Gravity @300C : 1.200 +0.02 Chloride content : Nil pH : min. 6 Shelf life : 1 year	0.4 to 0.8 kg / 100 kg of cementitious binder (depending on site requirements)	245 kg drum / Bulk (9MT)
5	DS-Setplast	Accelerating Plasticiser to reduces Setting time of concrete	ASTM C 494 - Type CIS 9103: 1999	• Reduces setting time depending on the dosage and ambient temperature. • Helps to achieve high early strength, hence reduction in de-shuttering time. Hence increases the construction work speed. • Helps in reducing cement content for a required strength. • Reduces construction cost- no delay due to cold weather, use of OPC instead of Rapid Hardening Cement. Read More	• Low temperature concrete • Precast and Reinforced Concrete • Concrete block and mortar • Concrete Pipes, Brick laying mortar mixes Read More	Colour : Colourless Liquid Specific Gravity @300C : 1.260 +0.02 Chloride content : Nil Shelf life : 1 year	03 to 38 kg/m3, depending upon acceleration desired.	245 kg drum
6	DS-Superplast	SNF based High Range Water Reducing Superplasticiser for Precast concrete	ASTM C 494 - Type FIS 9103: 1999	• Allows water reduction more than 20% whilst maintaining high flowability at lower water cement ratio, thereby increasing high early & ultimate strength. • With congested reinforcements. • Increases durability & impermeability. • Concrete with DS-Superplast shows higher strength than concrete without admixture having the same workability at early and later ages. Read More	• High Early, High Strength Concrete • Precast / Pre-stressed Concrete • Ready Mix Concrete for Higher grades • Pumped concrete Read More	Colour : Brown Liquid Specific Gravity @300C : 1.205 +0.02 Chloride content : Nil pH : min. 6 Base : Sulphonated Naphthalene Formaldehyde. Shelf life : 1 year	0.5 to 1.5 kg / 100 kg of cementitious binder (depending on site requirements)	250 kg drum / Bulk (9MT)
7	DS-Superplast RD	High Range Water Reducing Superplasticiser for Re-dosing	ASTM C 494 - Type FIS 9103: 1999	• Ideal admixture for re-dosing to extend workability without delay setting. • Maintaining high flowability at lower water cement ratio, thereby increasing high early & ultimate strength. • With congested reinforcements. • Increases durability & impermeability. • Lower pumping pressure. Read More	• Re-dosing for all general grades concrete • Ready Mix Concrete to extend workability without strength loss and without delay setting. • Pumped concrete Read More	Colour : Brown Liquid Specific Gravity @300C : 1.160 +0.02 Chloride content : Nil pH : min. 6 Base : Sulphonated Naphthalene Formaldehyde. Shelf life : 1 year	0.2 to 1.5 kg / 100 kg of cementitious binder (depending on site requirements)	235 kg drum / Bulk (9MT)
8	DS-Superplast 35	High Range Water Reducing and Retarding Superplasticiser for Lower Grades Concrete	ASTM C 494 - Type GIS 9103: 1999	• High workability for longer period. • Allows water reduction more than 20%. • With congested reinforcements. • Increases durability & impermeability. • Lower pumping pressure. • Higher ultimate strength. Read More	• Ready mix concrete • Piling concrete • Precast concrete • Casting in hot climates • Pumped concrete Read More	Colour : Brown Liquid Specific Gravity @300C : 1.230 +0.02 Chloride content : Nil pH : min. 6 Base : Sulphonated Naphthalene Formaldehyde. Shelf life : 1 year	0.5 to 1.2 kg / 100 kg of cementitious binder (depending on site requirements)	250 kg drum / Bulk (9MT)
9	DS-Superplast 45	High Range Water Reducing and Retarding Superplasticiser for Higher Grades Concrete	ASTM C 494 - Type GIS 9103: 1999	• High workability for longer period. • Allows water reduction more than 20%. • With congested reinforcements. • Increases durability & impermeability. • Lower pumping pressure. • Higher ultimate strength. Read More	• Ready mix concrete • Piling concrete • Precast concrete • Casting in hot climates • Pumped concrete Read More	Colour : Brown Liquid Specific Gravity @300C : 1.255 +0.02 Chloride content : Nil pH : min. 6 Base : Sulphonated Naphthalene Formaldehyde. Shelf life : 1 year	0.5 to 1.2 kg / 100 kg of cementitious binder (depending on site requirements)	250 kg drum / Bulk (9MT)
10	DS-Superplast (P)	High Range Water Reducing Powder Superplasticiser	ASTM C 494 - Type FIS 9103: 1999	• Allows water reduction more than 20% whilst maintaining high flowability at lower water cement ratio, thereby increasing high early & ultimate strength. • With congested reinforcements. • Increases durability & impermeability. • Concrete with DS-Superplast (P) shows higher strength than concrete without admixture having the same workability at early and later ages. Read More	• High Early, High Strength Concrete / Grouts • Useful for cementitious powder product to get flowability Read More	Colour : Brown powder Bulk Density (gm/lit): 450 + 50 Chloride content : Nil pH : min. 6 Base: Sulphonated Naphthalene Formaldehyde. Shelf life : 6 months	0.2 to 0.75 kg / 100 kg of cementitious binder (depending on requirements)	25 kg bag
11	DS-Hyperplast	Superplasticiser for High Performance concrete based on Poly-carboxylic Ether	ASTM C 494 - Type FIS 9103: 1999	• Excellent dispersion resulting in High workability • Increases early & ultimate strengths • Can be placed and compacted in congested reinforcements • Reduced labour requirements. • Increases durability & impermeability • Improved surface finish • Ideal for use in Self-compacting Concrete along with DS-VMA, Viscosity Modifying Admixture. Read More	• Precast / Pre-stressed Concrete • High Strength Concrete • High Performance Concrete • Self-Compacting Concrete • Pumped concrete Read More	Colour : Brown Liquid Specific Gravity @300C : 1.080 +0.02 Chloride content : Nil pH : min. 6 Base: modified Poly-carboxylic Ether. Shelf life : 1 year	0.5 to 1.5 kg / 100 kg of cementitious binder (depending on site requirements)	230 kg drum / Bulk (9MT)
12	DS-Hyperplast 2030	Lower Range PCE based superplasticiser with retention for concrete grades up to M30	ASTM C 494 - Type GIS 9103: 1999	• Excellent dispersion resulting in High workability and superb slump retention. • Increases early & ultimate strengths • Increases Flexural strength & E-modulus • Can be placed and compacted in congested reinforcements without vibration. • Reduced labour requirements. • Increases durability & impermeability • Improved surface finish Read More	• Ready Mix Concrete for Lower grades with more retention time. • Pumped concrete Read More	Colour : Brown Liquid Specific Gravity @300C : 1.080 +0.02 Chloride content : Nil pH : min. 6 Base: modified Poly-carboxylic Ether. Shelf life : 1 year	0.5 to 1.2 kg / 100 kg of cementitious binder (depending on site requirements)	230 kg drum / Bulk (9MT)
13	DS-Hyperplast 3040	Mid-Range PCE based superplasticiser with retention for concrete grades up to M45	ASTM C 494 - Type GIS 9103: 1999	• Excellent dispersion resulting in High workability and superb slump retention. • Increases early & ultimate strengths • Increases Flexural strength & E-modulus • Can be placed and compacted in congested reinforcements without vibration. • Reduced labour requirements. • Increases durability & impermeability • Improved surface finish • Ideal for use in Self-compacting Concrete along with DS-VMA, Viscosity Modifying Admixture. Read More	• Ready Mix Concrete for Higher grades with more retention time. • Self-Compacting Concrete • High Strength Concrete • High Performance Concrete • Precast / Pre-stressed Concrete • Pumped concrete Read More	Colour : Light Brown Liquid Specific Gravity @300C : 1.100 +0.01 Chloride content : Nil pH : min. 6 Base: modified Poly-carboxylic Ether. Shelf life : 1 year	0.5 to 1.2 kg / 100 kg of cementitious binder (depending on site requirements)	230 kg drum / Bulk (9MT)
14	DS-Hyperplast 4050 / 4050 (SCC)	High Range PCE based superplasticiser with retention for concrete grades more than M50 & Self Compacting Concrete	ASTM C 494 - Type GIS 9103: 1999	• Excellent dispersion resulting in High workability and superb slump retention. • Increases early & ultimate strengths • Increases Flexural strength & E-modulus • Can be placed and compacted in congested reinforcements without vibration. • Reduced labour requirements. • Increases durability & impermeability • Improved surface finish • Ideal for use in Self-compacting Concrete along with DS-Hyperplast 4050 (SCC). Read More	• Ready Mix Concrete for Higher grades with more retention time. • Self-Compacting Concrete • High Strength Concrete • High Performance Concrete • Precast / Pre-stressed Concrete • Pumped concrete Read More	Colour : Brown Liquid Specific Gravity @300C : 1.110 +0.01 Chloride content : Nil pH : min. 6 Base: modified Poly-carboxylic Ether. Shelf life : 1 year	0.5 to 1.2 kg / 100 kg of cementitious binder (depending on site requirements)	230 kg drum / Bulk (9MT)
15	DS-Hyperplast (P)	Powder Superplasticiser for High Performance concrete / Grouts based on Poly-carboxylic Ether	ASTM C 494 - Type FIS 9103: 1999	• Excellent dispersion resulting in High workability • Increases early & ultimate strengths • Increases Flexural strength & E-modulus • Can be placed and compacted in congested reinforcements • Reduced labour requirements. • Increases durability & impermeability • Improved surface finish • Ideal for use in Self-compacting Concrete along with DS-VMA, Viscosity Modifying Admixture. Read More	• High Early, High Strength Concrete / Grouts • Useful for cementitious powder product to get flowability Read More	Colour : Light Brown Liquid Bulk Density (gm/lit): 450 + 50 Chloride content : Nil pH : min. 6 Base: modified Poly-carboxylic Ether. Shelf life : 4 months	0.2 to 0.5 kg / 100 kg of cementitious binder (depending on site requirements)	25 kg bag
16	DS-AEA	Air Entraining Admixture for concrete	ASTM C 260 - 86	• Increases freeze / thaw resistance. • Reduces segregation and bleeding. • Reduces permeability- increased water tightness. • Greatly improved stability of air entrainment. • Improved plasticity and workability. • Ready to use solution is at optimum strength for accurate dispensing. • Improved surface finish Read More	• Entraining a controlled air content in wide range of concrete types: • Pavement Quality Concrete • Normal mix concrete • Low Slump Concrete • Concrete containing high carbon content fly ash • High fines concrete • Concrete using high-alkali cement Read More	Colour : Light Brown Liquid Specific Gravity @300C : 1.020 +0.02 Chloride content : Nil pH : min. 6 Shelf life : 1 year	0.01 to 0.10 kg / 100 kg of cementitious binder (depending on site requirements)	210 kg drum / Bulk (9MT)
17	DS-VMA	Viscosity Modifying Admixture (VMA) for Self Compacting Concrete.	EFNARC – Guidelines for VMA for concrete-September 2006	• Increased viscosity and thixotropic properties • Controlling bleeding and segregation for fluid mix • Improved stability during transportation & placing • Enhanced pumping & finishing • Reduced sagging- dimensional stability • Enables flexibility in mixture proportioning Read More	• Self-Compacting Concrete • Fluid Precast / Pre-stressed Concrete • Concrete with gap-graded aggregates • Concrete containing manufactured sand • Lean concrete Read More	Colour : Brown liquid Specific Gravity @300C : 1.000 +0.01 Chloride content : <0.2% pH : min. 6 Shelf life : 1 year	0.05 to 0.5 kg / 100 kg of cementitious material (depending on site requirements)	210 kg drum
18	DS-Corroguard	Corrosion Inhibiting admixture for RCC	ASTM C 494-Type C	• Corrosion Inhibitor that provides basic corrosion protection for steel reinforced concrete structures • Provides effective corrosion protection against chlorides in concrete Read More	• All types of RCC structures like marine structures, parking garages, bridge decks, slabs, floors, etc. Read More	Colour : Colourless Liq. Specific Gravity @300C : 1.260 +0.02 Chloride content : Nil Shelf life : 1 year	12 to 38 kg/m3, depending upon site requirement	245 kg drum

Sr. No.

Product Name

Description

Specification

Features / Uses

Typical Application

Technical Information

Dosage / Coverage

Packing

DS-Chemiplast

Water reducing plasticiser for concrete

ASTM C 494 – Type AIS 9103: 1999

• To increase / extend workability
• To reduce water content
• To increase compressive strength
• To effect cement economies
• Improves the cohesiveness in concrete mix helping to reduce bleeding & segregation.
• Allows water reduction till 10% whilst maintaining workability, thereby increasing strength, durability and impermeability.
• Lower pumping pressure

• Low grades concrete
• Precast concrete
• In concrete brick & block manufacture
• In hot climates to extend workability
• Wherever reduced water content would be of benefit to reduce permeability.

Colour : Brown Liquid
Specific Gravity @300C : 1.
170 +0.02
Chloride content : Nil
pH : min. 6
Shelf life : 1 year

0.3 to 0.8 kg / 100 kg of cementitious binder (depending on site requirements)

250 kg drum / Bulk (9MT)

DS-Retainplast

Slump Retaining plasticiser for concrete

ASTM C 494 - Type B & DIS 9103: 1999

• Enables controlled extension of initial set.
• Highly effective in high cement, low water content mixes where its use enables concrete to be more workable without loss in strength, density and durability.
• To reduce water content
• The retarding action allows continuous concrete pours to be made, thus reducing the number of construction joints needed.
• The strength gain of concrete containing DS-Retainplast is enhanced.

• Ready Mix Concrete
• Precast concrete
• In hot climates to extend workability & control setting time of concrete
• White cement concrete

Colour : Pale Straw Liquid Specific Gravity @300C : 1.160 +0.02 Chloride content : Nil pH : min. 6 Shelf life : 1 year

0.1 to 0.5 kg / 100 kg of cementitious binder (depending on site requirements)

235 kg drum

DS-Retainplast 10

Water reducing & retarding plasticiser for concrete

ASTM C 494 - Type B & DIS 9103: 1999

• Significantly increase or extend workability therefore easing placing.
• To reduce water content and increase compressive strength.
• To effect cement economies.
• Improves the cohesive property of concrete helping to reduce segregation and bleeding.
• Allows water reduction till 10% whilst maintaining workability, thereby increasing strength, durability and impermeability.

• Ready Mix Concrete for lower grades
• Precast concrete
• In hot climates to extend workability.
• Wherever reduced water content would be of benefit to reduce permeability.

Colour : Brown Liquid Specific Gravity @300C : 1.180 +0.02 Chloride content : Nil pH : min. 6 Shelf life : 1 year

0.4 to 0.9 kg / 100 kg of cementitious binder (depending on site requirements)

245 kg drum / Bulk (9MT)

DS-Retainplast 30

Water reducing & retarding plasticiser for concrete

ASTM C 494 - Type B & DIS 9103: 1999

• Ready Mix Concrete for lower grades
• Precast concrete
• In hot climates to extend workability.
• Wherever reduced water content would be of benefit to reduce permeability.

Colour : Brown Liquid Specific Gravity @300C : 1.200 +0.02 Chloride content : Nil pH : min. 6 Shelf life : 1 year

0.4 to 0.8 kg / 100 kg of cementitious binder (depending on site requirements)

245 kg drum / Bulk (9MT)

DS-Setplast

Accelerating Plasticiser to reduces Setting time of concrete

ASTM C 494 - Type CIS 9103: 1999

• Reduces setting time depending on the dosage and ambient temperature.
• Helps to achieve high early strength, hence reduction in de-shuttering time. Hence increases the construction work speed.
• Helps in reducing cement content for a required strength.
• Reduces construction cost- no delay due to cold weather, use of OPC instead of Rapid Hardening Cement.

• Low temperature concrete
• Precast and Reinforced Concrete
• Concrete block and mortar
• Concrete Pipes, Brick laying mortar mixes

Colour : Colourless Liquid Specific Gravity @300C : 1.260 +0.02 Chloride content : Nil Shelf life : 1 year

03 to 38 kg/m3, depending upon acceleration desired.

245 kg drum

DS-Superplast

SNF based High Range Water Reducing Superplasticiser for Precast concrete

ASTM C 494 - Type FIS 9103: 1999

• Allows water reduction more than 20% whilst maintaining high flowability at lower water cement ratio, thereby increasing high early & ultimate strength.
• With congested reinforcements.
• Increases durability & impermeability.
• Concrete with DS-Superplast shows higher strength than concrete without admixture having the same workability at early and later ages.

• High Early, High Strength Concrete
• Precast / Pre-stressed Concrete
• Ready Mix Concrete for Higher grades
• Pumped concrete

Colour : Brown Liquid Specific Gravity @300C : 1.205 +0.02 Chloride content : Nil pH : min. 6 Base : Sulphonated Naphthalene Formaldehyde. Shelf life : 1 year

0.5 to 1.5 kg / 100 kg of cementitious binder (depending on site requirements)

250 kg drum / Bulk (9MT)

DS-Superplast RD

High Range Water Reducing Superplasticiser for Re-dosing

ASTM C 494 - Type FIS 9103: 1999

• Ideal admixture for re-dosing to extend workability without delay setting.
• Maintaining high flowability at lower water cement ratio, thereby increasing high early & ultimate strength.
• With congested reinforcements.
• Increases durability & impermeability.
• Lower pumping pressure.

• Re-dosing for all general grades concrete
• Ready Mix Concrete to extend workability without strength loss and without delay setting.
• Pumped concrete

Colour : Brown Liquid Specific Gravity @300C : 1.160 +0.02 Chloride content : Nil pH : min. 6 Base : Sulphonated Naphthalene Formaldehyde. Shelf life : 1 year

0.2 to 1.5 kg / 100 kg of cementitious binder (depending on site requirements)

235 kg drum / Bulk (9MT)

DS-Superplast 35

High Range Water Reducing and Retarding Superplasticiser for Lower Grades Concrete

ASTM C 494 - Type GIS 9103: 1999

• High workability for longer period.
• Allows water reduction more than 20%.
• With congested reinforcements.
• Increases durability & impermeability.
• Lower pumping pressure.
• Higher ultimate strength.

• Ready mix concrete
• Piling concrete
• Precast concrete
• Casting in hot climates
• Pumped concrete

Colour : Brown Liquid Specific Gravity @300C : 1.230 +0.02 Chloride content : Nil pH : min. 6 Base : Sulphonated Naphthalene Formaldehyde. Shelf life : 1 year

0.5 to 1.2 kg / 100 kg of cementitious binder (depending on site requirements)

250 kg drum / Bulk (9MT)

DS-Superplast 45

High Range Water Reducing and Retarding Superplasticiser for Higher Grades Concrete

ASTM C 494 - Type GIS 9103: 1999

• Ready mix concrete
• Piling concrete
• Precast concrete
• Casting in hot climates
• Pumped concrete

Colour : Brown Liquid Specific Gravity @300C : 1.255 +0.02 Chloride content : Nil pH : min. 6 Base : Sulphonated Naphthalene Formaldehyde. Shelf life : 1 year

0.5 to 1.2 kg / 100 kg of cementitious binder (depending on site requirements)

250 kg drum / Bulk (9MT)

DS-Superplast (P)

High Range Water Reducing Powder Superplasticiser

ASTM C 494 - Type FIS 9103: 1999

• Allows water reduction more than 20% whilst maintaining high flowability at lower water cement ratio, thereby increasing high early & ultimate strength.
• With congested reinforcements.
• Increases durability & impermeability.
• Concrete with DS-Superplast (P) shows higher strength than concrete without admixture having the same workability at early and later ages.

• High Early, High Strength Concrete / Grouts
• Useful for cementitious powder product to get flowability

Colour : Brown powder Bulk Density (gm/lit): 450 + 50 Chloride content : Nil pH : min. 6 Base: Sulphonated Naphthalene Formaldehyde. Shelf life : 6 months

0.2 to 0.75 kg / 100 kg of cementitious binder (depending on requirements)

25 kg bag

DS-Hyperplast

Superplasticiser for High Performance concrete based on Poly-carboxylic Ether

ASTM C 494 - Type FIS 9103: 1999

• Excellent dispersion resulting in High workability
• Increases early & ultimate strengths
• Can be placed and compacted in congested reinforcements
• Reduced labour requirements.
• Increases durability & impermeability
• Improved surface finish
• Ideal for use in Self-compacting Concrete along with DS-VMA, Viscosity Modifying Admixture.

• Precast / Pre-stressed Concrete
• High Strength Concrete
• High Performance Concrete
• Self-Compacting Concrete
• Pumped concrete

Colour : Brown Liquid Specific Gravity @300C : 1.080 +0.02 Chloride content : Nil pH : min. 6 Base: modified Poly-carboxylic Ether. Shelf life : 1 year

0.5 to 1.5 kg / 100 kg of cementitious binder (depending on site requirements)

230 kg drum / Bulk (9MT)

DS-Hyperplast 2030

Lower Range PCE based superplasticiser with retention for concrete grades up to M30

ASTM C 494 - Type GIS 9103: 1999

• Excellent dispersion resulting in High workability and superb slump retention.
• Increases early & ultimate strengths
• Increases Flexural strength & E-modulus
• Can be placed and compacted in congested reinforcements without vibration.
• Reduced labour requirements.
• Increases durability & impermeability
• Improved surface finish

• Ready Mix Concrete for Lower grades with more retention time.
• Pumped concrete

Colour : Brown Liquid Specific Gravity @300C : 1.080 +0.02 Chloride content : Nil pH : min. 6 Base: modified Poly-carboxylic Ether. Shelf life : 1 year

0.5 to 1.2 kg / 100 kg of cementitious binder (depending on site requirements)

230 kg drum / Bulk (9MT)

DS-Hyperplast 3040

Mid-Range PCE based superplasticiser with retention for concrete grades up to M45

ASTM C 494 - Type GIS 9103: 1999

• Ready Mix Concrete for Higher grades with more retention time.
• Self-Compacting Concrete
• High Strength Concrete
• High Performance Concrete
• Precast / Pre-stressed Concrete
• Pumped concrete

Colour : Light Brown Liquid Specific Gravity @300C : 1.100 +0.01 Chloride content : Nil pH : min. 6 Base: modified Poly-carboxylic Ether. Shelf life : 1 year

0.5 to 1.2 kg / 100 kg of cementitious binder (depending on site requirements)

230 kg drum / Bulk (9MT)

DS-Hyperplast 4050 / 4050 (SCC)

High Range PCE based superplasticiser with retention for concrete grades more than M50 & Self Compacting Concrete

ASTM C 494 - Type GIS 9103: 1999

Colour : Brown Liquid Specific Gravity @300C : 1.110 +0.01 Chloride content : Nil pH : min. 6 Base: modified Poly-carboxylic Ether. Shelf life : 1 year

0.5 to 1.2 kg / 100 kg of cementitious binder (depending on site requirements)

230 kg drum / Bulk (9MT)

DS-Hyperplast (P)

Powder Superplasticiser for High Performance concrete / Grouts based on Poly-carboxylic Ether

ASTM C 494 - Type FIS 9103: 1999

• Excellent dispersion resulting in High workability
• Increases early & ultimate strengths
• Increases Flexural strength & E-modulus
• Can be placed and compacted in congested reinforcements
• Reduced labour requirements.
• Increases durability & impermeability
• Improved surface finish
• Ideal for use in Self-compacting Concrete along with DS-VMA, Viscosity Modifying Admixture.

• High Early, High Strength Concrete / Grouts
• Useful for cementitious powder product to get flowability

Colour : Light Brown Liquid Bulk Density (gm/lit): 450 + 50 Chloride content : Nil pH : min. 6 Base: modified Poly-carboxylic Ether. Shelf life : 4 months

0.2 to 0.5 kg / 100 kg of cementitious binder (depending on site requirements)

25 kg bag

DS-AEA

Air Entraining Admixture for concrete

ASTM C 260 - 86

• Increases freeze / thaw resistance.
• Reduces segregation and bleeding.
• Reduces permeability- increased water tightness.
• Greatly improved stability of air entrainment.
• Improved plasticity and workability.
• Ready to use solution is at optimum strength for accurate dispensing.
• Improved surface finish

• Entraining a controlled air content in wide range of concrete types:
• Pavement Quality Concrete
• Normal mix concrete
• Low Slump Concrete
• Concrete containing high carbon content fly ash
• High fines concrete
• Concrete using high-alkali cement

Colour : Light Brown Liquid Specific Gravity @300C : 1.020 +0.02 Chloride content : Nil pH : min. 6 Shelf life : 1 year

0.01 to 0.10 kg / 100 kg of cementitious binder (depending on site requirements)

210 kg drum / Bulk (9MT)

DS-VMA

Viscosity Modifying Admixture (VMA) for Self Compacting Concrete.

EFNARC – Guidelines for VMA for concrete-September 2006

• Increased viscosity and thixotropic properties
• Controlling bleeding and segregation for fluid mix
• Improved stability during transportation & placing
• Enhanced pumping & finishing
• Reduced sagging- dimensional stability
• Enables flexibility in mixture proportioning

• Self-Compacting Concrete
• Fluid Precast / Pre-stressed Concrete
• Concrete with gap-graded aggregates
• Concrete containing manufactured sand
• Lean concrete

Colour : Brown liquid Specific Gravity @300C : 1.000 +0.01 Chloride content : <0.2% pH : min. 6 Shelf life : 1 year

0.05 to 0.5 kg / 100 kg of cementitious material (depending on site requirements)

210 kg drum

DS-Corroguard

Corrosion Inhibiting admixture for RCC

ASTM C 494-Type C

• Corrosion Inhibitor that provides basic corrosion protection for steel reinforced concrete structures
• Provides effective corrosion protection against chlorides in concrete

• All types of RCC structures like marine structures, parking garages, bridge decks, slabs, floors, etc.

Colour : Colourless Liq. Specific Gravity @300C : 1.260 +0.02 Chloride content : Nil Shelf life : 1 year

12 to 38 kg/m3, depending upon site requirement

245 kg drum

Information

+91 99679 72227 / +91 9082925063

Concrete Admixtures

Our Services

Quick Links